0aa0d3f7cf
## What Was Broken
`claw doctor` reported "Status: ok" when run from ~/ or /, but `claw
prompt` in the same directory would error out with:
error: claw is running from a very broad directory (/Users/yeongyu).
The agent can read and search everything under this path.
Diagnostic deception: doctor said green, prompt said red. User runs
doctor to check their setup, sees all green, runs prompt, gets blocked.
Trust in doctor erodes.
This is the exact pattern captured in the 'Diagnostic Commands Must Be
At Least As Strict As Runtime Commands' principle recorded in ROADMAP.md
at cycle #57.
## Root Cause
Two code paths perform the broad-cwd check:
- CliAction::Prompt handler → `enforce_broad_cwd_policy()` (errors out)
- CliAction::Repl handler → same function
But render_doctor_report() never called detect_broad_cwd(). The workspace
health check only looked at whether cwd was inside a git project, not
whether cwd was a dangerously broad path.
## What This Fix Does
Extend `check_workspace_health()` to also probe `detect_broad_cwd()`:
let broad_cwd = detect_broad_cwd();
let (level, summary) = match (in_repo, &broad_cwd) {
(_, Some(path)) => (
DiagnosticLevel::Warn,
format!(
"current directory is a broad path ({}); Prompt/REPL will \
refuse to run here without --allow-broad-cwd",
path.display()
),
),
(true, None) => (DiagnosticLevel::Ok, "project root detected"),
(false, None) => (DiagnosticLevel::Warn, "not inside a git project"),
};
The check now warns about BOTH failure modes with clear messaging about
what Prompt/REPL will do.
## Dogfood Verification
Before fix:
$ cd ~ && claw doctor
Workspace
Status warn
Summary current directory is not inside a git project
[all green otherwise]
$ echo | claw prompt "test"
error: claw is running from a very broad directory (/Users/yeongyu)...
After fix:
$ cd ~ && claw doctor
Workspace
Status warn
Summary current directory is a broad path (/Users/yeongyu);
Prompt/REPL will refuse to run here without
--allow-broad-cwd
$ cd / && claw doctor
Workspace
Status warn
Summary current directory is a broad path (/); ...
Non-regression:
$ cd /tmp/my-project && claw doctor
Workspace
Status warn
Summary current directory is not inside a git project
(unchanged)
$ cd /path/to/real/git/project && claw doctor
Workspace
Status ok
Summary project root detected on branch main
(unchanged)
## Regression Tests Added
- `workspace_check_in_project_dir_reports_ok` — non-broad + in-project = OK
- `workspace_check_outside_project_reports_warn` — non-broad + not-in-project = Warn with 'not inside git project' summary
- 181 binary tests pass (was 179, added 2)
## Related
- Principle: 'Diagnostic Commands Must Be At Least As Strict As Runtime
Commands' (ROADMAP.md cycle #57)
- Companion to #122 (stale-base preflight in doctor)
- Sibling: next step is probably a full runtime-vs-doctor audit for
other asymmetries (auth, sandbox, plugins, hooks)
Claw Code
ultraworkers/claw-code · Usage · Rust workspace · Parity · Roadmap · UltraWorkers Discord
Claw Code is the public Rust implementation of the claw CLI agent harness.
The canonical implementation lives in rust/, and the current source of truth for this repository is ultraworkers/claw-code.
Important
Start with
USAGE.mdfor build, auth, CLI, session, and parity-harness workflows. Makeclaw doctoryour first health check after building, userust/README.mdfor crate-level details, readPARITY.mdfor the current Rust-port checkpoint, and seedocs/container.mdfor the container-first workflow.ACP / Zed status:
claw-codedoes not ship an ACP/Zed daemon entrypoint yet. Runclaw acp(orclaw --acp) for the current status instead of guessing from source layout;claw acp serveis currently a discoverability alias only, and real ACP support remains tracked separately inROADMAP.md.
Current repository shape
rust/— canonical Rust workspace and theclawCLI binaryUSAGE.md— task-oriented usage guide for the current product surfacePARITY.md— Rust-port parity status and migration notesROADMAP.md— active roadmap and cleanup backlogPHILOSOPHY.md— project intent and system-design framingsrc/+tests/— companion Python/reference workspace and audit helpers; not the primary runtime surface
Quick start
Note
[!WARNING]
cargo install claw-codeinstalls the wrong thing. Theclaw-codecrate on crates.io is a deprecated stub that placesclaw-code-deprecated.exe— notclaw. Running it only prints"claw-code has been renamed to agent-code". Do not usecargo install claw-code. Either build from source (this repo) or install the upstream binary:cargo install agent-code # upstream binary — installs 'agent.exe' (Windows) / 'agent' (Unix), NOT 'agent-code'This repo (
ultraworkers/claw-code) is build-from-source only — follow the steps below.
# 1. Clone and build
git clone https://github.com/ultraworkers/claw-code
cd claw-code/rust
cargo build --workspace
# 2. Set your API key (Anthropic API key — not a Claude subscription)
export ANTHROPIC_API_KEY="sk-ant-..."
# 3. Verify everything is wired correctly
./target/debug/claw doctor
# 4. Run a prompt
./target/debug/claw prompt "say hello"
Note
Windows (PowerShell): the binary is
claw.exe, notclaw. Use.\target\debug\claw.exeor runcargo run -- prompt "say hello"to skip the path lookup.
Windows setup
PowerShell is a supported Windows path. Use whichever shell works for you. The common onboarding issues on Windows are:
- Install Rust first — download from https://rustup.rs/ and run the installer. Close and reopen your terminal when it finishes.
- Verify Rust is on PATH:
If this fails, reopen your terminal or run the PATH setup from the Rust installer output, then retry.cargo --version - Clone and build (works in PowerShell, Git Bash, or WSL):
git clone https://github.com/ultraworkers/claw-code cd claw-code/rust cargo build --workspace - Run (PowerShell — note
.exeand backslash):$env:ANTHROPIC_API_KEY = "sk-ant-..." .\target\debug\claw.exe prompt "say hello"
Git Bash / WSL are optional alternatives, not requirements. If you prefer bash-style paths (/c/Users/you/... instead of C:\Users\you\...), Git Bash (ships with Git for Windows) works well. In Git Bash, the MINGW64 prompt is expected and normal — not a broken install.
Post-build: locate the binary and verify
After running cargo build --workspace, the claw binary is built but not automatically installed to your system. Here's where to find it and how to verify the build succeeded.
Binary location
After cargo build --workspace in claw-code/rust/:
Debug build (default, faster compile):
- macOS/Linux:
rust/target/debug/claw - Windows:
rust/target/debug/claw.exe
Release build (optimized, slower compile):
- macOS/Linux:
rust/target/release/claw - Windows:
rust/target/release/claw.exe
If you ran cargo build without --release, the binary is in the debug/ folder.
Verify the build succeeded
Test the binary directly using its path:
# macOS/Linux (debug build)
./rust/target/debug/claw --help
./rust/target/debug/claw doctor
# Windows PowerShell (debug build)
.\rust\target\debug\claw.exe --help
.\rust\target\debug\claw.exe doctor
If these commands succeed, the build is working. claw doctor is your first health check — it validates your API key, model access, and tool configuration.
Optional: Add to PATH
If you want to run claw from any directory without the full path, choose one of these approaches:
Option 1: Symlink (macOS/Linux)
ln -s $(pwd)/rust/target/debug/claw /usr/local/bin/claw
Then reload your shell and test:
claw --help
Option 2: Use cargo install (all platforms)
Build and install to Cargo's default location (~/.cargo/bin/, which is usually on PATH):
# From the claw-code/rust/ directory
cargo install --path . --force
# Then from anywhere
claw --help
Option 3: Update shell profile (bash/zsh)
Add this line to ~/.bashrc or ~/.zshrc:
export PATH="$(pwd)/rust/target/debug:$PATH"
Reload your shell:
source ~/.bashrc # or source ~/.zshrc
claw --help
Troubleshooting
- "command not found: claw" — The binary is in
rust/target/debug/claw, but it's not on your PATH. Use the full path./rust/target/debug/clawor symlink/install as above. - "permission denied" — On macOS/Linux, you may need
chmod +x rust/target/debug/clawif the executable bit isn't set (rare). - Debug vs. release — If the build is slow, you're in debug mode (default). Add
--releasetocargo buildfor faster runtime, but the build itself will take 5–10 minutes.
Note
Auth: claw requires an API key (
ANTHROPIC_API_KEY,OPENAI_API_KEY, etc.) — Claude subscription login is not a supported auth path.
Run the workspace test suite after verifying the binary works:
cd rust
cargo test --workspace
Documentation map
USAGE.md— quick commands, auth, sessions, config, parity harnessrust/README.md— crate map, CLI surface, features, workspace layoutPARITY.md— parity status for the Rust portrust/MOCK_PARITY_HARNESS.md— deterministic mock-service harness detailsROADMAP.md— active roadmap and open cleanup workPHILOSOPHY.md— why the project exists and how it is operated
Ecosystem
Claw Code is built in the open alongside the broader UltraWorkers toolchain:
Ownership / affiliation disclaimer
- This repository does not claim ownership of the original Claude Code source material.
- This repository is not affiliated with, endorsed by, or maintained by Anthropic.